Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2025 Winter Special – Inboards appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2024 Winter Special – Inboards appeared first on Atlantis Propeller.

If you have thought about spares, there is NO BETTER time to buy then right now! We also have a large inventory of used propellers at incredible savings!

Give us a call, get our best price and shop it around if you wish. We are confident you will not find a better value.

The post High Performance Propellers – 2024 Winter Sale! appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2023 Winter Special – Inboards appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2022 Winter Special – Inboards appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2021 Winter Special – Inboards appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Our Full-Service for STAINLESS STEELS includes: Cleaning of Prop, PROP SCAN Computerized Tuning of 4 Radii to Class 1 ISO 484/2 Standards, ANY necessary pitch changes, cup strengthening / adjustment, moderate welding, hub check, balancing, and High-Grade Mirror Polish.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2020 Winter Special – Inboards & Stainless appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Our Full-Service for STAINLESS STEELS includes: Cleaning of Prop, PROP SCAN Computerized Tuning of 4 Radii to Class 1 ISO 484/2 Standards, ANY necessary pitch changes, cup strengthening / adjustment, moderate welding, hub check, balancing, and High-Grade Mirror Polish.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2019 Winter Special – Inboards & Stainless appeared first on Atlantis Propeller.

Right now is an excellent time to check your boats (normally loaded) wide open throttle RPM. If your RPM falls short or over manufacturers recommended range we can correct it for you – (be sure to record your #’s.)

Proper ENGINE WOT RPM (coupled with PROP SCAN CLASS 1 ISO PROPELLERS) will assure you maximum performance,efficiency and engine longevity at your cruise RPM.

When your engines are loaded properly – They work at their most efficient.
When your props are Class 1 ISO (reduced slippage) – They work at their most efficient.
Combined you get the best performance possible from your boat!

Our Full-Service for INBOARDS includes: Cleaning of prop, PROP SCAN Computerized Tuning of 5 Radii to Class 1 ISO 484/2 Standards, any necessary pitch changes, cup strengthening/adjustments, ream bore, file/fit keyway, static balance, pattern blades and a high-grade finish. Price is based on diameter and # of blades – but you will find we are very competitive with ‘traditional’ shops.

Our Full-Service for STAINLESS STEELS includes: Cleaning of Prop, PROP SCAN Computerized Tuning of 4 Radii to Class 1 ISO 484/2 Standards, ANY necessary pitch changes, cup strengthening / adjustment, moderate welding, hub check, balancing, and High-Grade Mirror Polish.

Basically your prop will be more accurate than new out of the box!

As always: Prop pullers are available for FREE use by our customers.
Inboard Propellers can be checked on the PROP SCAN Computers (for Class 1 Tolerance) in 10 Minutes while you wait – FREE.

The post 2018 Winter Special – Inboards & Stainless appeared first on Atlantis Propeller.

The post Thanks!… and Hours Update appeared first on Atlantis Propeller.