The result was a timer that counts up from zero and with a button for resetting it, and a pair of Arduino libraries. The first library, HPNumberDisplay, can control an array of HP5082-7300/7302 (and probably 7340) displays. The second library, TimeCounter, can count (increment/decrement) time by arbitrary amounts. All source code for the libraries are available here.

I also recorded a short demo using my old camera. The quality could be better. Some day I will buy a proper camera.

As you may already know, there is no official port of FreeRTOS for the Kinetis L series of ARM Cortex M0+ MCUs. Fortunately there is an unofficial port by Erich Styger. The bad news is that the port is built around PE, and your will need to set it up together with Eclipse if you want to use FreeRTOS. The good news is that you only need to use it once and export the necessary code. Once you are done you can use whatever development tools you want.

Before you go any further you must follow Styger’s instructions for how to set up PE with Eclipse, and while it isn’t necessary you should also read his instructions for setting up and configuring FreeRTOS with PE. Play around with it. Make sure that it is working. Then read his instructions for generating static code from the FreeRTOS PE component that can be extracted and used on its own.

If you follow the instructions you will be left with a folder with all FreeRTOS code. Now comes the tricky part: using it in a project without PE. The exact details will depend on the tools and libraries you are using. In my case I wanted to create a C++ project in Eclipse using the GCC-ARM Eclipse plugin. I will go through some of the steps I had to take to get it to work and point out a few things that gave me trouble.

Once you have created a static copy of the FreeRTOS code,  move it into your new project.

I put all FreeRTOS files in one folder to simplify things.

Open the project properties and make the FreeRTOS folder a source folder.

Go to the build settings and also add the folder to the include path.

This should be enough for Eclipse to find all the new files, but if you now try to compile it you will get a long list of errors. Most of these are simple things that are easily fixed.

Getting interrupts to work was the hardest part. It is quite simple once you know what the problem is, but it was not obvious. The FreeRTOS code you have is set up to use the interrupt handlers and interrupt vectors created by other PE components. Since you do not have those components you must modify some parts of the code.

First, copy the ‘Events.h’ and ‘Events.c’ files from your PE project, remove all interrupt handlers not starting with FRTOS_ (assuming there are any), and then remove the FRTOS_ part of all function names (e.g. vApplicationIdleHook instead of FRTOS_vApplicationIdleHook). Do a search through all your other FreeRTOS code and do the same there (or wait for the compiler to complain). Some function names will be incorrect. If you are using C++ also make sure that the event files are enclosed within extern blocks. They will be used both by FreeRTOS’s C code and your C++ code.

#ifdef __cplusplus
extern "C" {
#endif

...

#ifdef __cplusplus
}
#endif

Next, if you are not using the interrupt vector you got from PE and instead uses the one from the GCC-ARM plugin (‘vectors_MKL25Z.c’), then you will have to change some function names. FreeRTOS uses a couple of interrupt handlers.

• SysTick_Handler
• SVC_Handler
• PendSV_Handler

Your FreeRTOS code and ‘vectors_MKL25Z.c’ will use different names for these interrupt handlers. This must be fixed.

In ‘portmacro.h’, replace the lines 291-293

void vPortSVCHandler(void); /* SVC interrupt handler */
void vPortPendSVHandler(void); /* PendSV interrupt handler */
void vPortTickHandler(void); /* Systick interrupt handler */

with

void SVC_Handler(void); /* SVC interrupt handler */
void PendSV_Handler(void); /* PendSV interrupt handler */
void SysTick_Handler(void); /* Systick interrupt handler */

In ‘port.h’, replace line 727

void vPortTickHandler(void) {

with

void SysTick_Handler(void) {

The line 848

__attribute__ ((naked)) void vPortSVCHandler(void) {

with

__attribute__ ((naked)) void SVC_Handler(void) {

And the line 999

__attribute__ ((naked)) void vPortPendSVHandler(void) {

with

__attribute__ ((naked)) void PendSV_Handler(void) {

The rest should be easy. There will be some inclusions of header files to remove and some that must be added, and a few function and variable names will be wrong. You also have to configure FreeRTOS (unless you did so before exporting the code). This is done in the ‘FreeRTOSConfig.h file’. Refer to FreeRTOS’s documentation for more information about that part.

This seemed as good an opportunity as any to start learning some Python (which to my great embarrassment I have not used much before). The result is a small Python script OVZ-Backup that backs up all OpenVZ containers (or a subset of them) using ploop snapshots and rsync. If there are errors it logs them with syslog and (optionally) sends out error messages to a list of email addresses/users.

The script sends out email using the ‘mail’ command and can only send them to local users as is. My last HowTo explains how you can use postfix to forward user email to an external address and relay emails sent from local email clients without SMTP support through your email provider’s SMTP server. This would let you send error messages to any email address you want.

When I started I had two requirements:

1. All local email sent to the root user (and preferably everyone else) must be forwarded to an external SMTP server and email account
2. All email that leave my network must be encrypted

After experimenting with number of different applications (GNU Anubis, Nullmailer, ESMTP, MSMTP, etc) I finally found something that worked; Postfix with GPG-Mailgate. If all you need is the ability to send email to an external account then there are other applications you could use instead (I had some success with MSMTP and Nullmailer). The advantage of using Postfix is its flexibility and maturity. All other applications I tried had some small thing they could not do reliably or would fail in some edge cases, such as only forwarding some of the emails sent to root, but not quite all of them.

This guide will show each step needed to set this up, and a few mistakes to look out for. The first part will cover Postfix and how to configure it to forward all emails sent to a local user to an external email account. The second part will show how to set up GPG-Mailgate so that all emails that are sent to certain accounts are encrypted with GPG before they leave the server. If all you need is mail forwarding then you can stop after the first part, and if you already have Postfix configured you can jump straight to the second part.

A few assumptions will be made in this guide.

1. You are using the root account. If you are not then you will have to prepend ‘sudo’ to some commands.
2. You are using Debian. Everything should still work if you are using a different Linux distribution, but you may have to make some minor changes.

Names and servers

I will be using the following user names, email accounts, and servers in this guide.

User names

root : The local root user

gpgmap : The user account used for GPG-Mailgate

Email accounts

root@server.localdomain.com : The fully qualified email address of the root user

user@emailprovider.com : An external email account that we want to send email through

admin@anotherdomain.com : An external email account that we want to forward all local emails to

Domains

yourdomain.com : Your local domain

emailprovider.com : The domain of your email provider

anotherdomain.com : The domain of the email provider for the account you want to forward all local email to

Servers

smtp.emailprovider.com : The SMTP server of your email provider

server.yourdomain.com : The computer you want to forward local emails from

Part 1 – Forwarding local email to an external SMTP server

The first step is to install and configure Postfix to forward all emails sent to the root user (or any user you want) to an external SMTP server and email account. This is not difficult, but it does require a few steps.

First, if you do not already have Postfix install it and some dependencies.

apt-get install postfix libsasl2-modules

Fill in any domain names the installer asks for and choose the “satellite” option.

If you are not already using Postfix then you are probably running Sendmail. Before starting Postfix you will have to turn it off. To avoid future error messages and warnings I also recommend you completely uninstall it.

service sendmail stop

apt-get remove sendmail-base sendmail-cf sendmail-doc

Next, start postfix.

service postfix start

Make sure that it started correctly.

service postfix status

Next comes the hard part (not really); configuring Postfix. The exact details depends on your email provider. Everything I describe here will be completely compatible with Gmail.

Most of the settings you need should have been configured for you by the installer.

Open ‘/etc/postfix/main.cf’ and make sure that the relay host is set to your email provider’s SMTP server.

relayhost = smtp.emailprovider.com:587

And add these lines:

smtp_use_tls=yes
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_sasl_security_options = noanonymous
smtp_sasl_tls_security_options = noanonymous
smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt

Next, create a password file ‘/etc/postfix/sasl_passwd’ and add the following to it:

smtp.emailprovider.com:587 user@emailprovider.com:yourpassword

The SMTP hostname and port must match relayhost in the main.cf file.

Update Postfix’s password database and settings.

postmap /etc/postfix/sasl_passwd
service postfix reload

Everything you need to send emails through Postfix using your email provider’s SMTP server should now be in place. Before proceeding you should test that it is working.

echo "Testing Postfix email delivery" | mail -s "Test email" admin@anotherdomain.com

If the email doesn’t arrive check in ‘/var/log/sysIog’ for errors and make sure that you can successfully send emails using the same settings from an email client (such as Thunderbird).

Now that that is working we only need to tell Postfix to forward all emails sent to the root user to an external email account. Open ‘/etc/aliases’ and add the following line:

root: admin@anotherdomain.com

If you want to forward emails for other users than root you simply add them to the list as well. When you are done run:

newaliases

That’s it. If everything is configured properly all emails sent to the root user will now be forwarded to admin@anotherdomain.com.

echo "Testing Postfix forwarding" | mail -s "Test email" root

If that was all you needed then you can stop here, but you are now sending unencrypted emails through the internet containing potentially sensitive information. If you think that sounds dangerous then continue to the second part were we will set up some automated GPG encryption.

A warning about restrictive SMTP servers and the From header

It is possible that these settings won’t work with your particular email provider. I’m using a Gmail account to forward email. It isn’t my primary email provider, but there are practical reasons for using it in this case. Unlike some other email providers Gmail does not care about what you specify in the ‘From’ header. It will overwrite whatever is in it with the Gmail user you used. This simplifies things greatly when forwarding local emails since you would otherwise have to change the contents of the header before sending it out. Postfix has the ability to replace addresses in outbound email (just google smtp_generic_maps or sender_canonical_maps and you should find instructions for how to configure Postfix), however, depending on how an application fills out the headers in emails they send out this may not work reliably in all situations. I tried to set this up with a more restrictive Zoho.com email account, but I could not get it to forward cron error messages.

If you need this for your email provider, and if you manage to set it up successfully, please leave a comment explaining how you did it. For everyone else; just use a Gmail account. It’s easier.

Part 2 – Encrypting outgoing email with GPG

It is possible that some of the applications sending email to your local accounts might send data that you don’t want any stranger on the internet to see. In my paranoid mind that just isn’t acceptable, and so we will be adding a layer of encryption to Postfix using GPG-Mailgate. GPG-Mailgate is a content filter script for Postfix that will encrypt a received email if there is a public GPG key available for its recipient, and if the email is not already encrypted. It is relatively easy to install and configure, but be warned that if you do not configure it correctly it will probably fail silently and send out empty emails.

First, either download the source code from Github or clone it.

git clone https://github.com/ajgon/gpg-mailgate.git

Next, manually put everything where it needs to be. Replace python2.6 with your python version.

cd gpg-mailgate
cp gpg-mailgate.py /usr/local/bin/gpg-mailgate.py
cp -r GnuPG /usr/lib/python2.6/

Make sure that all permissions are correct.

chown root:root /usr/local/bin/gpg-mailgate.py
chmod 755 /usr/local/bin/gpg-mailgate.py
chown -R root:root /usr/lib/python2.6/GnuPG
chmod 755 /usr/lib/python2.6/GnuPG
chmod 644 /usr/lib/python2.6/GnuPG/__init__.py

Create a user to run the GPG-Mailgate script as and import the public key you want to encrypt forwarded email with.

useradd -s /bin/false -d /var/gpg -M gpgmap
mkdir -p /var/gpg/.gnupg
chown -R gpgmap:gpgmap /var/gpg/.gnupg
chmod 700 /var/gpg/.gnupg
sudo -u gpgmap /usr/bin/gpg --import yourpublic.key

yourpublic.key is the public part of your GPG key pair. If you don’t have one already then your will need to create one. How to do that is beyond the scope of this guide, but it isn’t difficult.

Check that everything worked and that the key is in place.

sudo -u gpgmap /usr/bin/gpg --list-keys  --keyid-format long

This should give you something like this.

/var/gpg/.gnupg/pubring.gpg
 ---------------------------
pub 4096R/0123456789ABCDEF 2014-09-17
uid                        Your Name <admin@anotherdomain.com>
sub 4096R/FEDCBA9876543210 2014-09-17

Save whatever you have instead of ‘0123456789ABCDEF’. This is the identifier of your public key and you will need it later.

Add the following to the end of ‘/etc/postfix/master.cf’:

#GPG-Mailgate
gpg-mailgate unix - n n - - pipe
flags= user=gpgmap argv=/usr/local/bin/gpg-mailgate.py ${recipient}

127.0.0.1:10028 inet n - n - 10 smtpd
  -o content_filter=
  -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
  -o smtpd_helo_restrictions=
  -o smtpd_client_restrictions=
  -o smtpd_sender_restrictions=
  -o smtpd_recipient_restrictions=permit_mynetworks,reject
  -o mynetworks=127.0.0.0/8
  -o smtpd_authorized_xforward_hosts=127.0.0.0/8

Make certain that the user name and script location matches what you used above.

Add the following to ‘/etc/postfix/main.cf’:

content_filter = gpg-mailgate

And reload Postfix’s settings.

service postfix reload

Create a configuration file for GPG-Mailgate at ‘/etc/gpg-mailgate.conf’ and add the following to it:

[default]
# whether gpg-mailgate should add a header after it has processed an email
# this may be useful for debugging purposes
add_header = yes

# whether we should only sign emails if they are explicitly defined in
# the key mappings below ([keymap] section)
# this means gpg-mailgate won't automatically detect PGP recipients
keymap_only = yes

[gpg]
# the directory where gpg-mailgate public keys are stored
# (see INSTALL for details)
keyhome = /var/gpg/.gnupg

[logging]
# For logging to syslog. 'file = syslog', otherwise use path to the file.
file = syslog
verbose = no

[relay]
# the relay settings to use for Postfix
# gpg-mailgate will submit email to this relay after it is done processing
# unless you alter the default Postfix configuration, you won't have to modify this
host = 127.0.0.1
port = 10028

[keymap]
# You can find these by running the following command:
# gpg --list-keys --keyid-format long user@example.com
# Which will return output similar to:
# pub 1024D/AAAAAAAAAAAAAAAA 2007-10-22
# uid Joe User <user@example.com>
# sub 2048g/BBBBBBBBBBBBBBBB 2007-10-22
# You want the AAAAAAAAAAAAAAAA not BBBBBBBBBBBBBBBB.
#user@example.com = <gpg key id>
admin@anotherdomain.com = 0123456789ABCDEF
root@server.yourdomain.com = 0123456789ABCDEF

Replace the addresses and keys on the last two lines with the email address you want to forward emails to and the identifier of the public key you imported earlier.

The final line is a bit of a hack. GPG-Mailgate uses the ‘To’ header to find the GPG key to use when encrypting email. If it can’t find a matching entry in the configuration file it will not encrypt it. This creates a minor complication since Postfix doesn’t rewrite the ‘To’ header when forwarding local email. Any email sent to the root user will therefore have a ‘To’ address of ‘root@server.yourdomain.com’; which GPG-Mailgate won’t recognise. To fix this we add the local email address to the configuration file as well.

This should be all. Now test that everything is working.

echo "Testing GPG encryption" | mail -s "Test GPG" admin@anotherdomain.com

echo "Testing GPG encryption to root user" | mail -s "Test GPG root" root

These commands should both send an encrypted email to admin@anotherdomain.com. If it doesn’t work check ‘/var/log/syslog’ for errors.

If GPG-Mailgate did not encrypt your emails then it is likely that it did not find a matching public key. Make sure that the keys and addresses in ‘/etc/gpg-mailgate.conf’ are correct.

If you get empty messages then it is likely that GPG returned an error to GPG-Mailgate. This will cause GPG-Mailgate to fail silently. Make sure that the gpgmap user has the permissions needed to use the GPG keys in ‘/var/gpg/.gnupg’ and that gpgmap is used by Postfix when running GPG-Mailgate.

If you get an error about a missing GnuPG module then you either set the wrong permissions for the GnuPG folder and its contents, or you placed it in the wrong python folder.

If everything is working than this should be it.

• You can now send email through an external SMTP server from the command line
• All emails sent to the root user are forwarded to an external email address
• All emails sent to admin@anotherdomain.com are automatically encrypted before they leave the server

Update 1:

Turns out that most of my problems didn’t have anything to do with the move. It was only some old (and in one case very old) misconfigurations that didn’t take effect until I rebooted one of my servers; that, and I had forgotten just how much memory Gitlab uses.

Update 2:

The cluster is almost complete. I only need to configure Heartbeat and it should be done. Unfortunately, moving my servers revealed some rather alarming deficiencies in how some of the older servers have been configured, how backups are handled, and especially in how they are monitored. One server (albeit not a very important one) had not been backed up for months, and I had not been alerted of this. This is not acceptable!

The cluster will have to wait until I have dealt with this.

Update 3:

I have learnt a few things.

First, backup systems will (in this case at least) only work if all clocks are in sync, and if one of the servers doesn’t have a CMOS battery then any NTP failures will break the backup system. If the server in question also doesn’t have a proper hard drive to store logs on, can’t run OSSEC, can’t store logs remotely using rsyslog, and doesn’t send system mail to an external mail server, then the first you will hear of this is when you need those backups.

Second, a DRBD cluster is not worth the effort of managing properly for a couple of private servers. It was very easy to set up, but robust it was not. My first attempt to try taking a node down ended with the whole cluster going down and refusing to synchronize. It was probably my fault (it was in the middle of the night, so I’m pretty sure it must have been my fault in some way), but when the DRBD service started giving error messages and crashing, I decided it was time to try something else while I knew the data on one node was still good.

I did not want to be forced to restore my servers from backups. The reason I did this in the first place was because I’m unhappy with my backup system and I needed a stop-gap I could use until I can set up something more robust. Perhaps I will try this again in the future, but for now I will fall back on simple snapshots.

So ends my latest adventure with needlessly complex solutions to simple problems; in disgraceful failure and the use of a more appropriate tool. Next on the list; soldering and configuration management systems.

Because of this I wrote a simple little program ‘writetoserial’ that reads the contents of file and writes it to a serial port as binary data. This works far more reliably and I’m now able to send both large text files and binary files to the FRDM-KL25Z.

I have uploaded the resulting list to GitHub. Since I had to do part of the work by hand there could be mistakes. I will be updating the list as soon as the program that will be using it is complete and I can verify that the values are correct.

Serial and USBSerial are two different methods for creating serial connections using mbed. USBSerial creates an emulated serial port over a normal USB port while Serial uses the built in serial port (if there is one). In the case of the FRDM-KL25Z  this can be done through the virtual serial port provided by OpenSDA.

This small example will create two serial connections; one using the serial port built into OpenSDA, and one over the normal USB port. It will pass everything given to either interface on to the other interface.

#include <mbed.h>
#include <USBSerial.h>

Serial debug(USBTX, USBRX);
USBSerial usb;

int main()
{
  while(1) {
    if(usb.readable()) {
      debug.putc(usb.getc());
    }
    if(debug.readable()) {
      usb.putc(debug.getc());
    }
  }
}

Compile the code and load it onto your FRDM-KL25Z, then  connect it to your computer using both USB ports and run the following command.

ls -l /dev/ttyACM*

Your output should look something like this.

crw-rw---- 1 root dialout 166, 0 Aug 19 13:56 /dev/ttyACM0
crw-rw---- 1 root dialout 166, 1 Aug 19 14:19 /dev/ttyACM1

Each of these device files are connected to one of the serial interfaces on the FRDM-KL25Z. To use them you will first have to add your user to the dialout group.

sudo usermod -a -G dialout USERNAME

You can use any terminal emulator of your choice to connect to these serial ports. I will be using minicom for this example.

Open two terminals. On the first run:

minicom -b 9600 -D /dev/ttyACM0

And in the second:

minicom -b 9600 -D /dev/ttyACM1

‘-b 9600’ sets the baud rate. The default value used by mbed is 9600.

If everything is working correctly whatever you write in one terminal should now appear on the other, and vice versa. If it doesn’t create new lines when you press ‘enter’ and it instead jumps to the beginning of the current line, tell minicom to add linefeeds by pressing ‘Ctrl-a a’.

This post will show you how to set up a development environment around the FRDM-KL25Z using the GCC toolchain and mbed library. To make it more general I will not use any IDE. This will all be by hand. Once you have it working it should not be a problem

I had to buy a freedom board for a school class, and I was frustrated at first to find that there was no support for the linux platform. I'm personally a fan of the teensy ARM microprocessors which are supported by GCC or the Arduino IDE, now I can add the new micro to my growing collection. Thanks again for the great article!

to set up an IDE around it as well, but that is left as an exercise to the reader.

Getting everything to work will require a few steps.

1. Install the mbed firmware
2. Install the GCC ARM toolchain
3. Set up debugging tools
4. Download and build the mbed library
5. Create a simple program

Installing the mbed firmware

There are several firmware variants you can install on your FRDM-KL25Z. You can use whichever version you like as long as it supports the CMSIS-DAP debugging interface (i.e. any firmware other than what came pre-installed). The one I have chosen to use is the mbed firmware. It is easy to use and performs a sanity check on any binaries you give it to make sure that you don’t accidentally brick your device (which you very well might do if you are not careful).

To install the mbed firmware first download the newest version. At the moment  (2014-08-13) that would be this one.

Start the board in bootloader mode by holding down the reset button while plugging in the board using the SDA USB port.https://mbed.org/handbook/CMSIS-DAP

A mass-storage device named BOOTLOADER will appear. If you were using Windows it would be enough to copy the firmware file to this device and restart the board, but since you are using Linux it isn’t quite that simple. You first have to mount it using the ‘msdos’ file system type.

sudo mount -t msdos /dev/sdd /mnt

In my case the board shows up as /dev/sdd. This may, of course, be different in your case. Copy the firmware file to /mnt and restart the board. You should now see a mass-storage device named MBED.

To test that everything is working you can try one of mbed’s example programs. Sign in or create an account and click “Import Program”. This will take you to their online IDE where you can export the program to a ‘.bin’. Copy this file to the MBED  device and press the reset button. If everything is working then the led will probably start blinking (depending on the example you chose).

You could stop here and just use mbed’s online IDE. The rest of this guide will show you how to compile your own programs offline with GCC and the mbed library, and how to get the USB debugging interface to work.

Install the GCC ARM toolchain

The next step is to install the tools needed to compile your own programs. For this you want the gcc-arm-none-eabi from launchpad. Download the one ending with linux.tar.bz2, unless you want to compile it from source.

Just extract it somewhere, add the bin directory to you path variable, and you are done.

Set up debugging tools

With any new firmware the FRDM-KL25Z will support USB debugging using the CMSIS-DAP debugging interface. To use it we need to install OpenOCD and hidapi.

First you must download and install hidapi.

git clone http://github.com/signal11/hidapi.git

cd hidapi

./bootstrap

./configure

make

sudo make install

Next, do the same for OpenOCD.

git clone http://openocd.zylin.com/openocd

cd openocd

./bootstrap

./configure --enable-maintainer-mode --enable-cmsis-dap --enable-hidapi-libusb

Open ‘tcl/target/kl25.cfg’ and add the following text to the end.

adapter_khz 50
$_TARGETNAME configure -event gdb-attach {
    halt
}

make

sudo make install

Permissions

By default only the root user has access to the device files used for debugging. If you want to give a normal user permission to use the debugging tools you will have to set up some udev rules.

Create the file ‘/etc/udev/rules.d/45-mbed_debugger.rules’ and add the following to it.

SUBSYSTEM=="usb", ATTR{idVendor}=="0d28", ATTR{idProduct}=="0204", MODE="0660", GROUP="plugdev"

Similarly, create the file ‘/etc/udev/rules.d/99-hidraw-permissions.rules’ and add the following to it.

KERNEL=="hidraw*", SUBSYSTEM=="hidraw", MODE="0664", GROUP="plugdev"

This will give all users in the ‘plugdev’ group read and write access to all relevant device files. You could use any group you want, or just a specific user.

To test that it is working run the following command as a non-privileged user with the FRDM-KL25Z plugged in.

openocd -c "interface cmsis-dap" -f /usr/local/share/openocd/scripts/target/kl25.cfg

If it complains about not finding the libhidapi-hidraw.so.0 library check that ‘/usr/local/lib’ is in ‘/etc/ld.so.conf’, run ‘ldconfig’, and try again.

If you now open a second terminal you should be able to connect to the device with GDB.

arm-none-eabi-gdb --eval-command "target remote localhost:3333"

Download and build the mbed library

The mbed development platform consists of an online browser based IDE and compiler (as you saw earlier), and an open source library that simplifies the development of embedded systems code by hiding low level details from the programmer. This is part we want. To use the library offline without the IDE you will have to  download and compile the source code.

git clone https://github.com/mbedmicro/mbed.git

cd mbed/workspace_tools

In addition to the main mbed library, the repository contains a number of other useful libraries that can be installed.

The following command will build the mbed library and all the optional libraries that are compatible with the FRDM-KL25Z.

python build.py -m KL25Z -t GCC_ARM --rtos --usb --dsp --fat

When it is done you can find the compiled libraries in ‘build’. Move them to where you want the mbed libraries to be located.

Create a simple program

Finally everything that you need to build your own programs is in place, but before you can start programming we will have to pull all of the pieces together and show how to compile a program from source code. For this example we will, of course, create a simple program that turns the three LEDs on and off.

Most of the work needed to build a program for the FRDM-KL35Z has already been taken care of for you by the mbed library. All you must do is link everything together and compile it. You could set this up by hand, but I recommend you start out by using this makefile. It will set up all the paths and include directories for you. What is left is to set the path to the mbed libraries in MBED_PATH, set the program name in TARGET,  add any local source and header folders to SRC_DIRS and INC_DIRS, and to tell it which mbed libraries to use.

Next, create the file ‘src/main.cpp’ and add the following to it.

#include <mbed.h>

Ticker tick;

DigitalOut led1(LED_RED);
DigitalOut led2(LED_GREEN);
DigitalOut led3(LED_BLUE);

void flip() {
    led3 = !led3;
}

int main()
{
    led3 = true;

    //Flip the blue LED every 5 seconds
    tick.attach(&flip, 5.0);

    //Flip the red and green LED once every second
    while (true) {
        led1 = true;
        led2 = false;
        wait (1.0);
        led1 = false;
        led2 = true;
        wait (1.0);
    }
}

Don’t forget to add the ‘src’ folder to SRC_DIRS in the makefile, then compile with ‘make’.

If everything is working as it should it should now create a ‘build’ directory with the file ‘mbed.bin’ in it (assuming you did not change TARGET). Copy this file to the MBED device, wait for it to load it, and then press the reset button. The LED should now start blinking in different colors.

That’s all. You are now ready to start programming your own programs. Build something interesting.

Some helpful tips on how not to lock your FRDM-KL25Z and save yourself much pain

Unless you are careful you will sooner or later manage to “lock” your FRDM-KL25Z. This happens when you accidentally enable the security bits. If you have not set up the mbed library (in particular the *.ld files) correctly then this could happen very easily. The mbed firmware will protect you from this mistake by refusing to flash binaries with the security bits enabled, but there are ways to bypass it using the debugger and OpenOCD.

To check if you have set the security bits open the binary in a hex editor and look at the contents of address 0x0000040C. The last two bits should be “10”. If it isn’t, something is wrong and you should NOT attempt to flash this binary to the board. Seriously, don’t do it!

If you ignored my advice and flashed the board with a binary that had the security bits enabled then you will have to unsecure it. This can be a little complicated, but if you read these instructions and still didn’t follow my advice then it’s your own fault. Supposedly there are tools you can use to unsecure the device, but I have not found any that are free and works in Linux. Fortunately, some variants of the FRDM-KL25Z firmware will unset the security bits when they are installed. You can then reinstall the firmware you want to use. This can require some trial and error, but I have had success with the MSD-DEBUG-FRDM-KL25Z_Pemicro_v114.SDA firmware.

Save yourself a lot of trouble and make sure that you don’t do this in the first place. Unless you know what you are doing only program the device by copying binaries to the MBED mass-storage device.

Sources

http://mbed.org/handbook/Firmware-FRDM-KL25Z
http://karibe.co.ke/2013/08/setting-up-linux-opensource-build-and-debug-tools-for-freescale-freedom-board-frdm-kl25z/
http://embeddedworldweb.blogspot.se/2013/08/mbed-gcc-with-eclipse-kl25z-part-1.html
http://mcuoneclipse.com/2012/11/04/how-not-to-secure-my-microcontroller/

It is based on code I wrote for a project during a university course several years back. I needed a way of reading data from XML files, and since I did not know how large these data files would be I used a StAX parser. But StAX parsers are a pain to work with so I hid it behind a more DOM like interface to make it easier to use. It was ugly, but it worked. I later reused and improved the parser during my master’s thesis, when I once again needed a simple way of parsing very large XML files.

JaspXML is based on that final version. I completely rewrote, reorganized, documented, and tested it. What was left is a small and simple XML iterator that can step through an XML document using three commands; next(), down() and up().

next()

Steps forward one step and returns the next element at the current depth of the XML document.

down()

Steps down to the children of the current element.

up()

Steps back up to the parent of the current element.

An example application is provided that uses JaspXML to parse an XML document and prints out the contents of each element.