We got the privilege to play around with this 2024 Ford F250 Black Widow! We started by installing HornBlaster’s 6 horn spare tire delete air horn kit with electric drain valve release. We wired these up to the factory switch panel to make things as clean as possible. Then it was time to give this truck an unforgettable audio system! Want amazing audio? Then install Hertz Mille line speakers. Front stage was treated to Hertz MPK163.3 3-way component speakers. The rear doors received the Hertz MPK1650.3 to round of the full range audio. We obviously had to drop subs in this beast. What better way to do that than a MTI Acoustics stage four custom box with Black Widow etching and RGB. We had to go with non-other than 2 of Kickers 12″ L7T subs. Finally, this entire audio system is powered by all Hertz Audio amplifiers. This truck Just looks and sounds amazing!!

Here at AudioWorks we get the opportunity to work on some unique and interesting projects. This Moke LSV (low speed vehicle) was missing a few cool upgrades that we were happy to make happen. We started by installing a radio in the dash followed by 2 sets of Kicker marine speakers with RGB lighting. To really set the look of the vehicle on the outside we installed a Morimoto 8 piece RGB rock light kit. This is one vehicle that is going to be hard to miss! Bring us your project and see how we can help you today!

It was time for this 2025 RAM to get lifted and get some new shoes. We started off by elevating this beautiful truck 6 inches into the air with a Rough Country lift kit. What good is a lift kit if it doesn’t have wheels and tires to help fill the new empty space? Lets fill it up! We did that by adding Fuel Off Road Assaults in a gloss black  20 x 9 and finished them with Nitto Recon Grapplers in a 35/12.50/20. She is sitting pretty and this truck is ready to turn heads! Stop by today and get a free estimate to customize your truck.

Our customer wanted his SRT Durango to look as mean as it sounds. We were happy to oblige! We started with Lighting Trendz demon eye LED’s and matching DRL’s in the flow series. Followed by a flow series SRT emblem on the lower front grille and full front grille illumination. With the outside looking complete it was time to customize the interior. We installed a full starry night headliner kit that had over 800 strands of fiber optic. Our customer wanted something a little extra though. A second kit was installed to give him some customized lettering on the headliner! All said and done this Durango is going to turn heads!

We had the pleasure of working on this 2025 Ford F150 regular cab truck brought to us by a returning customer. This truck has been completely built up with horsepower and it was time to make the audio match! We installed Hertz MPx690.3 speakers in the front door to bring that full stage audio alive. Next we added Hertz ML28.3 Tweeters in the front A-pillar to make the highs a little more present to compliment the added subwoofer. Next the truck got a custom subwoofer box that got matched to a JL Audio 13TW5 13.5″ shallow mount subwoofer to make sure our customer really “feels the bass”! To finish this beast off, we installed a custom amp rack to house the crossovers, resistors and to properly display the workhorse of this system. The MLPower5 roars this audio alive providing 2- channels for the 6×9’s and 2 channels for the tweeters and providing 550 watts for the JL Audio 13.5″ sub. The audio in this truck will make our customer smile for years to come! After throwing some tint on this beauty all we have left was to deliver it! Stop by AudioWorks and let us help you build your dream audio system!

Do you have a Wrangler? Only one place to bring it! This 2025 Jeep Wrangler 4XE came in to get a suspension work up. We started with a Rough Country 2.5″ lift but used Fabtech Shocks instead. After lifting it we threw on a full set of Fuel Offroad Traction’s wrapped in 35/12.50/20’s. We installed a spare tire relocation bracket so the new wheel and tire didn’t hit the bumper.  We finished this beauty off by installing Rough Country power steps to make it easier to get in and out especially after the lift and 35’s. Bring your Jeep down to us and let’s build you something special!

Our customer brought us this beautiful new 2026 Toyota 4Runner and wanted to give it a new stance. We started with a 2″ leveling kit to give us room to add bigger tires to this stunning truck. A truck this nice deserves wheels that compliment it. We went with 4Play 4P83 22×9 two tone rims with a +15 offset and finished them off with Nitto Terra Grappler 285/40/22’s. Another happy customer left with an eye catching 4Runner!!

This beautiful truck came to us pretty much stock. Customer wanted 37’s and we made it happen! This beautiful 2024 GMC Denali 2500HD was fitted with a 6″ Lift Kit with Fox Shocks. We tossed some new shoes on using KG1 Forged rims with 37 Ridge Grappler Tires. We finished up this monster with a chrome delete grille, body painted splash guard delete’s and a steering stabilizer to make sure this Denali wont struggle with these beautiful 37’s. Come get a free estimate to upfit your vehicles suspension!  

Check out this brand new Toyota Corolla GR with XKGlow’s XKmax underglow kit. The XKmax Ultra Kit packs nearly three times the brightness of standard XKmax tubes, delivering unmatched glow and intensity. Thanks to its ultra-thin end cap design, you can mount two tubes end-to-end for a flawless, continuous beam of light. With 2ft, 3ft, and 4ft tube options available, you’ll always have the flexibility to combine lengths and achieve the perfect fit for your ride’s sides. This XKGlow max was ordered and installed here at AudioWorks. Come get yours today!

We’ve already spent many hours making this one off 2023 Ford Bronco into a tough looking tactical truck. We started off with FabFour’s front Grumper and Vicowl. Then it got the FabFour quarter panels and fender liner panels and rear bumper. We threw all kind of lights at this beast including rock lights in the wheel wells, Quake RGB cube’s in the vicowl and for ditch lights. The front grumper got Rigid RGB 6″ spots  to light up the night! We finished the front off with illuminated bronco lettering. The rear received Quake RGB lights as well hidden behind the lower screen. We thought we were done but our customer said “make it have a power top!” It was our pleasure to make it happen. We installed Bestop’s power top and this Bronco is just awesome!