Although the VVT in your MINI is probably something you don’t think about very often, it is an important aspect of the engine, and problems with it can have huge implications on your MINI. Let us dive deeper into it.

How the VVT System in your Mini Works

The VVT is a newer technology to automobiles that has been implemented into Mini automobiles. It is found in the car engine and acts to reduce pollutants, allowing you to save money on gas while also improving the efficiency of your MINI. The VVT can raise the maximum engine speed, resulting in increased peak power and improved vehicle handling.

In technical terms, VVT works with the valve lift systems to optimize ignition. They work together to align the valve timing with the engine’s operating conditions. This increases your engine’s efficiency, resulting in a better running system, lower gas emissions, and fuel usage.

Symptoms of Mini Cooper VVT Issues

Engine Light Illumination

This feature is provided in your Mini fundamentally to notify you of danger, defect, or failure of any of your car parts, particularly those related to the engine. The VVT is found in the engine and on the computer board of your vehicle, near the “check engine” light. This indicates that if there is an issue with the VVT, the check engine light will most certainly illuminate.

However, since the “check engine” light is designed to alert you to faults in several places that affect the engine, you may not realize there is a problem with the VVT until it becomes late. As a result, you must seek the assistance of a qualified specialist as soon as possible.

Dirty Oil

When the VVT starts to malfunction, it’s usually due to contaminated engine oil. So, because the VVT works directly with engine oil, having clean, clog-free oil circulating through your engine always should not be overlooked. Debris and other impurities can cause your VVT to malfunction. By changing your oil on a regular basis, you can keep this portion of your car in top condition.

Fluctuations in the Engine

When the VVT begins to fail, you will notice that your gears start to function poorly. The engine will stall and fluctuate as a result, resulting in erratic driving performance. This shift in performance has the potential to become a dangerous distraction and should be addressed with immediate effect.

Reduced Gas Mileage

Because the VVT works alongside gas in the car, any damage to this part will have a significant impact on how your automobile manages fuel. If you observe a significant change in how your car transports fuel, you may have a VVT issue. Having a technician examine your variable valve timing sensor is one method to find out. If this part is damaged, your VVT as a whole will most likely need to be replaced.

How to Deal with VVT Failure

One of the most effective methods of dealing with VVT issues is to prevent them from occurring in the first place. This can be performed by maintaining your MINI on a regular basis. Changing your vehicle’s oil on a constant basis and taking your MINI to routine service checkups are two excellent strategies to maintain your vehicle’s VVT in good working order and minimize any damage to the engine.

When a VVT is already deteriorating, it is recommended that it should be replaced as soon as possible. The best course of action is to hire Mini-trained specialists who will be familiar with the VVT’s location in your vehicle and will know how to access and repair it appropriately without causing damage to your engine or its surrounding components.

Corpus Auto Service Will Help!

If your MINI’s VVT isn’t working properly, you should take it to a reputable mechanic. At Corpus Auto Service, we provide quality repairs for Mini’s. In managing MINI engines, we have experienced and capable technicians, expert mechanics, and factory qualified master mechanics.

We have built a reputation for offering dependable and high-quality Mini engine-related repair services in Corpus Christi and the neighboring locations, such as Portland, Rockport, Aransas Pass, and Calallen, TX. Please call us as soon as possible to schedule an appointment. We are excited to work with and for you!

* Blue Mini Cooper Car image credit goes to: Luca Piccini Basile.

The post The Most Sought-After Repair Shop in Corpus Christi to Address VVT Issues in a Mini appeared first on Corpus Auto Service.

Before we delve deep into discussing what causes the clicking sound, let’s understand the basics of how ignition works.

Your Fiat’s Ignition

The ignition switch allows low battery power to flow to the starter relay/solenoid and to the engine control module. The relay then sends full battery power to the starter motor. This engages the pinion gear that spins the flywheel. The flywheel turns the crankshaft, causing the pistons to move and compress the air-fuel mixture.

The engine control module meters the right amount of air and fuel into the cylinder and prompts the spark plugs to fire, igniting and starting your engine.

The Usual Causes of clicking Sounds

Low or dead battery

A low or dead battery is the most common reason there’s a clicking sound during ignition in your Fiat. Typically, your car’s battery should read 12.65 volts or at least 12.45 for it to start. When you hear a rapidly repeating clicking sound, your battery has just enough to run the starter motor but not enough to crank the engine.

The low voltage causes the starter motor to turn on and off. As the starter motor does that, the teeth of the pinion gear clatter against the flywheel and produce the clicking sound. If you experience this, call for help to jumpstart your Fiat and head to a repair shop immediately for further inspection. If your car won’t jump start, call for assistance or to tow it to our repair shop.

Damaged alternator

The alternator provides electrical power to the battery. If it fails to provide the necessary voltage output, it can cause a clicking sound every time you start the car. The only solution to a faulty alternator is to replace it.

Corroded or loose terminals

Another reason your Fiat makes a clicking sound when you turn the ignition key could be that the battery terminals are corroded or loose. In this case, the power from the battery is restricted and is not enough to crank the engine. You can always look for any loose connections and retighten them. Similarly, clean any corrosion on the terminals. However, remember that you might not get everything right if you are not a trained mechanic. Therefore, it is best to get your Fiat inspected by qualified mechanics.

Faulty starter motor

When the starter motor in your Fiat is faulty, it will not crank the engine. What you will hear is a clicking sound without the engine turning up. Your Fiat’s starter can last anywhere from 30,000 to 200,000 miles. However, it can be damaged prematurely by a faulty triggering mechanism or due to factors like harsh weather and engine conditions. In this case, the starter motor will have to be inspected by a professional and replaced.

Faulty solenoid

A faulty solenoid will cause your car to produce a single click due to high electrical contacts within the starter portion. This interferes with the ignition circuit.

Seized engine

Various causes can lead your Fiat’s engine to seize up. It could be that the engine has been sitting for too long, it is hydro-locked, or even vapor locked. A seized engine may need a rebuild. This can only be handled by experienced mechanics well versed with Fiats.

Corpus Auto Service is Your One-Stop Shop

Now that you know what causes that frustrating clicking sound when turning your ignition key, it is time to reach out to Corpus Auto service. For more than 35 years, Corpus Auto Service has been servicing European vehicles around Portland, Rockport, Aransas Pass, Calallen, and Corpus Christi areas of Texas. Our experienced technicians are determined to return your Fiat to its perfect functioning glory and provide you with tactics to avoid future problems. Call us today!

* Fiat Car image credit goes to: Multiart.

The post Why Your Fiat is Making Clicking Sound When Turning the Ignition Key appeared first on Corpus Auto Service.

Oil naturally deteriorates with time due to contaminants, chemical changes, and high temperature and pressure in the engine. Contaminated oil will change in consistency, texture, and color. Therefore, you need to check your engine oil regularly to ensure that it is of the proper quality. Oil changes are a part of responsible car ownership.

Common Reasons for Irregular Oil Texture in Your Jaguar

• Extreme heat: Extreme heat in the engine causes oil oxidation, deposits, and thickening of oils. Light molecules evaporate in high temperatures, leaving large and heavy molecules behind. Consequently, the oil viscosity Conventional motor oils are highly susceptible to breakdown in high heat. They may form sludge deposits on engine components. It is advisable to use a Jaguar-approved oil that can better withstand the engine conditions of your car or the oil that your maintenance expert will recommend.
• Contaminants: The common contaminants include dirt and dust that may get in the engine through faulty air cleaners or crankcase ventilation. Also, metal particles produced by the engine wear and are picked up by oil as it circulates. These contaminants may change the texture of your engine oil.
• Additives: Additives are added to the base oil to help protect engine components. These additives include viscosity index improvers, corrosion inhibitors, and antifoaming agents. However, additives perform specific tasks and are affected differently by the engine environment. When a particular additive breaks down under the pressure of the engine, it will compromise the oil quality.
• Combustion byproduct: Combustion byproducts like water, acids, soot, and carbon may also cause irregular oil texture in your Jaguar. Soot creates sludge that can clog filters. Sludge deposits on oil pump screens limit oil flow leading to accelerated wear in engine parts. The unburned fuel may leak into the crankcase leading to oil dilution.
• Broken air filters: Air filters prevent dirt and debris from entering the engine. A broken air filter may allow dirt particles to pass and mix with oil consequently, affecting its texture.

The Importance of Changing Your Engine Oil

Irregular oil texture is a clear symptom of bad oil that needs to be changed. Your Jaguar is a high-performance car and requires a regular oil change every 4,000 to 6,000 miles.

Changing your engine oil will allow your engine to perform at its optimum levels. Fresh oil provides efficient lubrication that reduces friction and heat produced by the engine components. Also, changing the oil gets rid of debris and dirt from the engine.

If you are not sure when to change your engine oil you can visit a repair shop specialized in Jaguar for routine maintenance.

Additionally, a regular oil change will get you better gas mileage. When you clean all the grit and dirt from your Jaguar’s engine, the engine will perform optimally and use the gas efficiently.

Dirty oil causes a buildup of hydrocarbons inside the engine’s crankcase. The hydrocarbons get burned up and released into the atmosphere through the exhaust system. When your car is in this condition, you might not pass the required emission test.

Expert Jaguar Service at Corpus Auto Service

An oil change may sound too simple to improve your engine performance, but it’s vital to your enjoyment of your ride. When you notice your oil has irregular texture or has other contamination signs, you should seek expert Jaguar service for your vehicle.

Corpus Auto Service is your best auto service center for your Jaguar. We have a team of experienced professionals trained to work with the latest tools and equipment to offer unparalleled service. We provide high-quality services to drivers in the Portland, Rockport, Aransas Pass, Calallen, Corpus Christi, TX areas. Additionally, our services come with a one-year warranty. Give us a call today and let us earn your business!

* Jaguar F-Pace Car image credit goes to: YuriyVlasenko.

The post Causes of Irregular Oil Texture in a Jaguar appeared first on Corpus Auto Service.

We encourage you to pay close attention to any unusual noises in your car engine and bring it to our auto mechanics as soon as you suspect a problem. There could be multiple reasons for the noise you hear in your engine, but for accurate diagnostics and repair, we suggest that you visit our nearest auto repair shop. Let’s take a closer look at the possible problems.

Causes for a Noisy BMW Engine

Gas leaks

Your BMW runs the exhaust of your car through an attachment to the engine. If a leak occurs in the manifold, it results in an expulsion of gases. These could sometimes lead to the noise you hear in your engine.

Low steering fluid

A bad steering pump and steering fluid could lead to bigger problems for your BMW. Low-power steering fluid could cause whirring sounds in your engine.

Drive belt or pulley bearing

Often when there is a problem with your drive belt or pulley bearing, the engine will make a loud squeaking sound when accelerating. This sound will likely stop when the engine warms up but it shouldn’t be ignored. Your BMW should be towed to our repair shop for an inspection.

Loose lifter

A loose lifter often results in a necessary repair. A loose lifter is a mechanical problem and is often accompanied by a ticking sound in the front of your car. When the lifter in your BMW cones loses, it will continually tap against the camshaft and this friction produces the ticking sound you often hear.

Alternator Bearings

Another common cause of noise in your BMW engine is a faulty alternator bearing. These bearings work together with the rotor to perform major electrical functions in your vehicle and to recharge its battery. It is important to get your BMW checked immediately if you hear the rattling in order to prevent extensive damage.

Overheating

When your vehicle overheats over a long period of time, it causes parts to break down and causes extensive damage. Overheating can cause your crankshaft and bearing to seize as well as damage the engine in the long run.

How to Fix the Noise in your BMW

Paying regular attention to the parts of your BMW is absolutely necessary. It’s only with constant observation that you can detect early enough the unusual noises in your vehicle. As mentioned earlier, sometimes the noises in the car are part of the regular functioning of the vehicle. Hence to prevent the problems in the vehicle from getting worse, you should take note of them early enough.

This aside, it is important to change your engine oil regularly. It is advisable to regularly clean out your oil tank and change your engine oil to prevent contamination. If you are unable to do this yourself, you should conduct well-trained personnel to do this for you.

Also, it is pertinent to take your vehicle to a reputable auto repair shop for repairs. This should be done immediately when you notice the damage in order to prevent it from escalating. Leaving the damage unrepaired could cause it to damage other parts of the vehicle, which would ultimately result in more expenses for repair.

Bring Your BMW to Certified BMW Experts at Corpus Auto Services

At Corpus Auto Services, we are a family-owned auto repair service with over 37 years of experience. We pride ourselves on our group of well-trained technicians who are constantly working to keep all our customers safe on the road.

We specialize in the repair and maintenance of all kinds of European cars and brands. If you happen to hear the noises in your BMW and you live in or near Portland, Rockport, Aransas Pass, Calallen, Corpus Christi, TX, be sure to reach out to us as soon as possible for a diagnosis and repair.

* BMW X2 Car image credit goes to: JJFarquitectos.

The post Call On Our BMW Experts Corpus Christi to Fix a Noisy Engine appeared first on Corpus Auto Service.

Jaguar is a top pick amongst European drivers because it can drive comfortably even under tough conditions. The vehicles have an air suspension system to aid in delivering the smooth and comfortable driving experience that the brand promises. The air suspension system helps level all road imperfections and ensures the vehicle occupants enjoy a smooth ride. It then becomes essential to ensure proper maintenance of this air suspension system.

Why does the air suspension system in a jaguar fail?

The failure of air suspension in your Jaguar is inevitable because the system is susceptible to natural wear and tear, which happens after an extended period of use. The system is even more complicated because its proper functionality relies on a host of other electronic sensory components of the car, making it difficult to manage. Discussed below are some of the causes of your Jaguar’s air suspension system failure.

• Bad driving habits: Some drivers tend to overstress their vehicle capability while driving. Making sharp and abrupt turns as well as driving through potholes and speed bumps at high speed all tend to accelerate the wear and consequent tear of your Jaguar’s air suspension system.
• Airbag leakages: Another factor that can cause the system’s failure is air leakage from the suspension system. This air leak usually occurs when one or more airbags are damaged. Leaking of an airbag is one of the most consistent causes of air suspension system failure since it leaves the suspension system compromised.
• Air compressor failure: The air suspension system relies on several components, including the air compressor, for proper functioning. The compressor is responsible for pumping the appropriate proportion of air and regulates the air pressure in the airbag so the bag can function as a spring. Damage in one of the components making up the suspension system, such as an airbag leak, puts pressure on the compressor, which ultimately causes it to wear out. When the air compressor wears out, it may cause the suspension system to fail, thereby impacting your driving experience.

Signs of a Failing Air Suspension System in your Jaguar

The air suspension system in your Jaguar is instrumental in delivering a smooth driving experience. Keeping the system in perfect condition requires proper and constant maintenance. Certain noticeable symptoms characterize the failure of the air suspension system. If your vehicle shows any of the following signs, you may need to visit an expert.

• Vehicle resting lower to one side: When you observe that your Jaguar is resting lower on one side than the other, you should get it checked out as that might result from an airbag leak. Early detection and fixing might help prevent further damage and eliminate the risk of spending more on repairs.
• Reduced vehicle performance: Of course, you need to visit an expert when you notice a change in your vehicle’s performance. When you start to feel the vibrations of road imperfection in the vehicle cabin or the impacts from driving through speed bumps, it is an indication that your suspension system needs inspection.
• Unusual sounds: The air suspension system most likely signals that something is amiss when the suspension system begins to make odd or unusual sounds while driving.

Leaving the problem unattended can cause further damage to other vehicle parts. You can always stay ahead of the air suspension system failure by consulting a Jaguar specialist whenever you notice any of these symptoms.

Corpus Auto Service, Leaders In European Auto Maintenance and Repairs

Corpus Auto Service is a family-owned business that has been in operation for over 3 decades. We are leaders in European auto maintenance and repairs and understand that these vehicles require specialized tools and expertise.

At Corpus Auto Service, our ASE-certified mechanics have years of experience working with European vehicles, including your Jaguar. We are located in Corpus Christi, TX, and also serve drivers throughout Portland, Rockport, Aransas Pass, and Calallen. Call or visit us at our shop today to set an appointment with our specialists!

The post The Leading Repair Shop in Corpus Christi to Fix a Failed Air Suspension in Jaguar appeared first on Corpus Auto Service.

If there is any complaint common to Mercedes drivers, it is an issue with turnover or engine starting. We know the extreme inconvenience that one might experience trying to start their Mercedes in the morning so they could leave for work, only the car won’t start.

Many Mercedes drivers use their vehicle daily. Naturally, this wear begins to take its toll on the engine. So, if you encounter a starting problem in your Mercedes, it will be helpful to know a little bit about the potential causes and signs that points to problems with weak cranking.

Factors that Lead to Weak Cranking Problems

The issue of weak cranking usually has root causes in the engine:

• Battery Health: Mercedes batteries are designed for up to a decade’s use, provided there is proper maintenance. Your car’s battery utilizes a chemical reaction between lead and sulphuric acid for the production of the electricity used in starting it and to engage the lights and accessories when the car isn’t running. This chemical reaction produces some amount of current, so the battery size determines the amount of current it can produce.
• Failing Alternator: Alternators are supposed to charge the battery continually as the motor runs, and if this isn’t working, the battery won’t be charged enough to start the car or keep it running. If your Mercedes has weak cranking or is unable to start, the battery and the alternator are usually the first parts to check. As your engine runs, your alternator is expected to produce enough electricity to run the vehicle, and if it happens to be low on output, then you will have an issue with the charging system.
• Fuel System Malfunction: An appropriate combination of fuel and oxygen is required for the engine of your Mercedes to start. Your fuel pump might just be responsible for the cranking issues your car is experiencing, leading to issues with the combustion process. Sometimes, your fuel pump might become clogged with build-up and residue of materials and this will prevent it from supplying the engine with the adequate amount of fuel required to start the engine during initial combustion.
• Starter Issues: The source of starter motor problems can come from diverse locations within the system, and issues with the starter motor usually affect the starter fuse’s The cause of the weak cranking you might be experiencing in your Mercedes could be attributed to the starter motor. There could be a high level of current flowing through electrical contacts that power the starter motor and its spinning motion, but the contacts can wear out over time. You might not be able to discover this problem without the help of our professional mechanics so bring your Mercedes to us so we can run a complete diagnostic test to get to the root of the issue.
• Bad Wiring: In order to function properly, your starter needs two wires, the large one running straight from the battery and supplying power to the starter, while the smaller wire is a signal created from turning your key, instructing the starter to engage and make use of all the power that comes from the battery. If any of the wires are creating a poor connection or become rusted or broken, they may not give off enough power for the car to start. The wires can be replaced by automotive technicians if this is the case.

Allow our Mercedes Experts to Assist You

Weak cranking can really be a frustrating problem, it can cause delays and unwanted expenses as well. However, such issues are avoidable if you engage us at Corpus Auto Services. We serve clients in and around Portland, Rockport, Aransas Pass, Cal Allen, and Corpus Christi, TX. For routine diagnostic checks for your car, or if you are currently experiencing weak cranking issues with your Mercedes, we are happy to offer our professional services to repair your car and restore it to top condition.

* Mercedes Car image credit goes to: joephotographer.

The post Expert Repair of a Mercedes Suffering from Weak Cranking in Corpus Christi appeared first on Corpus Auto Service.

These luxury automobiles are designed to enhance the driving experience for those who choose them whether they be driving down the highway with the music turned up or down a back road with the windows down. While Land Rovers are designed using state-of-the-art equipment, transmission failure may occur.

What does the transmission do?

All Land Rover vehicles are designed with either a manual or automatic transmission beneath the hood. This transmission is responsible for transferring power from the driveshaft to the wheels allowing the vehicle to move.

To propel your vehicle forward or put the car in reverse, you must choose the appropriate gear for the right speed. In doing so, you also maximize the vehicle’s power and fuel economy. If your vehicle was built with a manual transmission, you will utilize a clutch pedal and gear shift to manually select the appropriate gear, whereas an automatic transmission takes the effort for you and chooses the gear itself.

What causes transmission failure?

Transmission issues can be the result of many different things and getting to the root of the problem will help you to fix it much more quickly. Land Rover experts in Corpus Christi have joined forces to help you better understand what causes transmission failure in these popular vehicles.

Transmission fluid

Transmission fluid is designed to lubricate the various parts within the transmission, prevent oxidation and rust, as well as maintain fluid pressure and gasket lubrication. Land Rover requires each model to have a specified amount of clean transmission fluid at all times in the reservoir.

When transmission fluid becomes too low, the driver may experience shifting issues including erratic, delayed, or not shifting at all as well as a grinding noise from the gears grinding together due to a lack of lubrication or an illuminated check engine light on the dashboard.

Parts failure

The transmission is made up of several smaller parts that must work together in harmony to allow the vehicle to shift gears when prompted depending on the speed and direction in which the driver wishes to move their vehicle. When these parts begin to fail, the transmission is unable to function as it was designed to, leaving the driver stuck where they are at.

Some of these parts include:

• A faulty torque converter causes the transmission fluid to overheat or gears to begin slipping.
• Worn down bands that can result in delayed shifting, shifting at much higher RPMs than needed, or the inability to put the vehicle in reverse.
• Software issues in the transmission control unit causing erratic shifting.

The above-mentioned issues can also result in your Land Rover entering into what experts call “limp mode” meaning you will still be able to drive. However, you will have a significant reduction in power. It is not recommended to continue driving your Land Rover long term while it is in limp mode to avoid further damage.

Corpus Auto Service is Here for You

At Corpus Auto Service, we are a family-owned and operated facility that has been helping drivers of Texas for more than 35 years in several areas including:

• Corpus Christi
• Portland
• Rockport
• Aransas Pass
• Calallen

We are a Bosch Certified automotive maintenance and repair facility specializing in service and repair work of many models of popular brands such as Audi, BMW, Fiat, Jaguar, Land Rover, Mercedes, Mini Cooper, Porsche, Volkswagen, and Volvo.

Our team of ASE Certified technicians uses factory-grade, high-quality diagnostic tools and equipment to accurately diagnose your vehicle’s issues as soon as possible and begin repairs once a service agreement has been made. All repair work provided by our highly skilled technicians is backed by our one-year warranty.

In addition to our outstanding, unmatched customer service, we are happy to provide customers with a comfortable waiting area, complimentary snacks, free WiFi, and exceptional Bosch financing options with an easy application process and low monthly payments. Give the Corpus experts a call to get your car back on the road safely.

The post The Best Repair Shop in Corpus Christi to Fix a Transmission Failure in a Land Rover appeared first on Corpus Auto Service.

The Function of the Chassis Flex Disc

The flex disc, also known as a guibo, is a rubber coupling device linked to both the input and output shaft flanges. These flanges then link to critical components such as the transmission, driving shaft, and differential.

There is a flex disk in both the front and back of Mercedes automobiles. The front disc connects the transmission to the driveshaft and can be found beneath your vehicle with a skilled eye. The rear disk connects the driveshaft to the differential and is straightforward to find.

The flex disks serve a very straightforward purpose. They absorb excess torque delivered to the shaft during acceleration and deceleration, as well as prevent the driveshaft from feeling transmission vibrations. The flex disks have a long lifespan of roughly 200,000 miles due to their simplicity and reinforced rubber construction.

Chassis Flex Disk Failure: What Causes It?

Rubber flex disks are used on the chassis. The rubber in this product is frequently exposed to high temperatures, causing it to expand. Premature wear and cracking are caused by the material’s expansion and contraction. Suspension exercise also puts a lot of strain on the discs. Driving on rough roads will also reduce the disc’s lifespan.

Symptoms of Damaged or Failed Chassis Flex Disks

You will encounter symptoms if your flex discs are damaged. If you see any of the symptoms listed below, you should have your Mercedes evaluated straight soon. Continuing to drive your car risks causing more damage. The following are the most prevalent symptoms of a flex disc failure in a chassis:

• Trouble Shifting Gears: A faulty chassis flex disk might make changing gears When switching from park to drive or park to reverse, this problem is common. Transmission and engine problems might potentially create shifting troubles.
• Constant Vibrations: When the flex disks fail, the driveshaft becomes loose, causing intense vibrations. This causes vibrations by allowing the driveshaft to move around. The vibrations might be so strong that the ride is unpleasant.
• Worn Out Chassis Flex Disk: A visual inspection of the chassis flex disks might occasionally reveal noticeable faults. The disks could be damaged, deformed, or detached from the components.
• Knocking noises: In the instance when you accelerate and you hear knocking noises below your automobile, chances are that there might be problems with the chassis flex disk.

Corpus Auto Service will Repair Your Mercedes with Precision

If you have a problem with your Mercedes, get it looked out as soon as possible. Continuing to drive your automobile after a problem has been identified can result in significant damage and a costly service bill.

At Corpus Auto Service, we take pride in our prompt and high-quality repairs. With a history dating back 37 years, we’ve become well-known in the area for our excellent customer service and support. We’re perfectly located to serve the communities of Portland, Rockport, Aransas Pass, Calallen, Corpus Christi, TX. We’ve become well-known in the area for our excellent customer service and support. We always want our customers to be satisfied, which is why we provide a standard 12-month warranty from the time of service, since we believe in our expert workmanship.

We also strive to alleviate the stress of auto repair by providing WiFi while you’re waiting for your car and a shuttle service to keep you on the road while your car is at the shop. Simply said, if your Mercedes develops a problem, we want you to know that we’re only a phone call away and eager to assist you, no matter how big or small the issue is. Contact us today!

The post How to Deal with a Chassis Flex Disk Failure in a Mercedes appeared first on Corpus Auto Service.

Causes For Mercedes Check Engine Light

We’ve compiled a list of some of the most common reasons why your Mercedes check engine light will illuminate:

• An Unsecured Gas Cap: Your car’s check engine light might come on by chance if you forgot to tighten your gas cap after filling up your car. When the gas cap is loose, vapors from the gasoline tank seep out. Thus, your car’s engine computer signals to your dashboard to remind you to tighten the gas cap. Similarly, if your gas cap is cracked or missing, the check engine light will come on.
• A Dead Battery: This is one of the issues that car owners frequently miss or overlook. The battery controls all of your vehicle’s electrical systems. If your battery is low, your check engine light may come on. If that happens, consider charging or replacing your car’s battery.
• A Poorly-Installed Aftermarket Alarm: With their high-pitched sirens, aftermarket alarms tend to shock and frighten intruders and keep them at bay. However, if they aren’t installed correctly, they can cause a variety of problems in your car, including battery drain, which will flash the check engine light.
• A Defective Oxygen Sensor: It’s one of the most prevalent causes of a flashing check engine light. Your Mercedes-Benz’s oxygen sensor keeps track of the amount of unburned oxygen in the exhaust. The check engine light will appear on your dashboard if an oxygen sensor is defective.
• Exhaust Gas Recirculation (EGR) Valve Failure: In order to improve the efficiency of your vehicle’s performance, your car’s engine emits nitrogen oxide, which is quite poisonous. The exhaust gas recirculation valve aids in the reduction of nitrogen oxide emissions. The EGR valve may wear down over time, causing the check engine light to flash.

Take Action

First and foremost, do not panic. The check engine light can occur for many of the reasons listed above, and not all of them necessitate costly repairs. However, don’t ignore the signs, but instead, follow the instructions below.

• Inspect Your Car: Stop driving, step out of the car, and inspect the engine. Determine the severity of the problem by inspecting the valves, hoses, spark plugs, and gauges.
• Check The Gas Cap: If you can’t find any obvious cause for your search light engine to light on, double-check your gas cap just to be sure. Maybe that’s the sticking point. Tighten it up and look for the sign on your dashboard once more.
• Lighten Your Load: If you haven’t made any progress after following the first two steps, then aim for your trusted Mercedes specialist. However, try reducing the speed of your car and lightening any extra burden on your way to us.

Corpus Auto Service For Your Mercedes Benz

Since 1984, Corpus Auto Service has assisted and earned the appreciation of drivers in the Portland, Rockport, Aransas Pass, Calallen, Corpus Christi, TX areas. Our services are not limited to Mercedes-Benz vehicles. We also work with Volvo, Jaguar, Land Rover, Mini, Porsche, Audi, and BMW vehicles. In addition, all of our services come with a one-year warranty.

With exceptional service, up-to-date technology, and factory equipment, our licensed mechanics are always ready to help your Mercedes get safely back on the road at affordable prices. We will provide suggestions and tactics to help you avoid these issues in the future. Make an appointment with us, and allow our technicians to maintain and repair your Mercedes when needed. We look forward to having you as one of our happy, returning customers!

The post What Causes the Check Engine Light to Come on in a Mercedes? appeared first on Corpus Auto Service.

Coolant purposely has a sweet scent so you can detect it if and when it is leaking from your car. This must be identified and repaired quickly. Coolant circulates via the radiator, engine, different hoses, and the heater core, which is often positioned beneath the dashboard. A sweet smell from your Fiat is frequently followed by an overheating issue in your engine, thus a thorough check should be undertaken as soon as possible by a professional who is familiar with Fiat models.

The radiator cap of a vehicle at operating temperature should never be removed when your car is hot as the liquid may explode from the release of pressure and inflict severe injuries to you.

Odd Odors from Your Fiat

Sweet smells in your vehicle aren’t always a good thing. Some say leaking coolant smells like maple syrup, while others say it smells like butterscotch or cinnamon. Regardless of the description, a sweet smell typically indicates that your coolant is leaking.

Coolant, often known as antifreeze, is the fluid in your automobile that controls the temperature of the various systems. It reduces overheating inside your engine bay, and it also keeps the system from freezing in the winter.

There is no smell associated with a properly functioning coolant system. However, if you sense a sweet coolant smell anywhere around your vehicle, then coolant is leaking. Your engine could overheat as a result of this.

Overheating can eventually lead to catastrophic engine failure, so coolant leaks must be taken seriously. This can take a long time or happen quickly, depending on the severity of the leak. Engine failure can make your engine seize up while driving, resulting in an accident.

Seek Help From a Fiat Specialists

Coolant leaks are real threats that can be caused by a variety of factors. Bring your car to a shop right away so a technician can figure out what’s wrong. They’ll figure out where the leak is and whether it was caused by another issue in the first place.

Understanding that a sweet smell around your vehicle is a warning sign could save you a lot of money in the long run. Early detection of a coolant leak is critical for preventing engine failure. You never know how quickly a leak will worsen, so get it checked out by a mechanic as soon as you suspect you have one. Early detection is much less expensive in the shop than late detection. If the problem is left unattended for too long, a coolant leak can cause a vehicle to be wrecked.

Additional Risks

If the possibility of engine failure wasn’t frightening enough, you should know that a coolant is extremely toxic, as it contains the poisonous compound ethylene glycol. While an adult is unlikely to ingest enough through a leak to cause significant harm, children and animals are vulnerable, and that amount could severely injure or even kill them. A tablespoon of it is enough to shut down a dog’s kidneys if they lick it off the garage floor. Children and animals may be drawn to coolant because of its sweet smell.

Keep coolant containers tightly sealed and out of the reach of children and pets. If spilled, make sure it is cleaned with soapy water and materials used are disposed of properly where a pet cannot pull them out of the garbage.

Corpus Auto Service Can Help

When you start noticing a sweet smell in your Fiat, it is time to bring your vehicle in for servicing. We specialize in European automobiles at Corpus Auto Service, Corpus Christi, TX. Our experts are skilled and qualified in FIAT’s repair and maintenance, so you can trust our service delivery when you bring your vehicles in to check the reason for the perceived sweet smell. We serve clients in Corpus Christi and its neighboring areas like Portland, Rockport, Aransas Pass, Calallen, TX.

We provide high-quality servicing and use modern techniques and technology to diagnose your FIAT issues. We will thoroughly check your FIAT and trace the specific problem. After we have performed the repairs, you will be able to drive off in your newly serviced FIAT with the confidence that the best has been done. Visit us at Corpus Auto Service today to schedule an appointment for your FIAT repairs.

The post If Your Fiat is Producing Sweet Smell, Call Us in Christi for the Solution appeared first on Corpus Auto Service.