Added Function to the Audio Insert
Added Function to the Looper Track
Delay/Reverb Send Added to EXT IN and PC IN
Added Functions to the SCATTER
Added Function to the Metronome Position
Added Shortcuts
Great job:-)
]]>If you’ve not registered your hardware with Roland use this link – Roland Backstage
If you have already registered use this link – Roland Cloud and use your serial number as the key.
Available until 31/1/2021
]]>There’s 128 patches included in the project, with the first 12 clip lines divided by the randomizer categories and the last 4, er, random. These are pretty much straight from the randomizer, with the only changes made being to the Attack time on the AMP envelope to reduce clicking. Also, there’s not much variation on the Percussion sounds, probably the only sounds that do not randomize that well.
Download HERE.
]]>ETA: Yes, missed a couple, and also had wrong value for Program Changes.
]]>UPDATE HISTORY
[ Ver.1.60 ] SEP 2020
Additional Functions
Please refer to the “MC-707 Update” for detailed information in the [ Owner’s Manuals ].
Arpeggiator Function Added
USB-Related Functions Added (Generic Driver Function)
RANDOM TONE DESIGNER Function Added
SCATTER Functions Added
Sound Pack/SVZ Drum Import Function Added
Functions Added to the Total Effect Compressor
Sequencer Edit Functions Added
Added Shortcuts
Loving the Arpeggiator and the random function does actually create some nice random patches:-)
]]>UPDATE HISTORY
[ Ver.1.30 ] MAR 2020
Additional Functions
Please refer to the “MC-707 Update” for detailed information in the [ Owner’s Manuals ].
Clip Chain Function Added
MIDI Input/Output Functions Added
Auto Channel Function Added
Audio Insert Function Added
Note Repeat Function Added
SMF Import Function Added
Display Method Added for Clip Mode
Sample Edit Function Added
Function Added to Edit WAV File Before Loading
Step LFO Editor Added
Note Utility Functions Added
Motion Drawing Function Added
Loving the Clip Chain, but the ability to change the CC numbers for the FILTER, MOD and FX knobs is really nice to see too:-)
]]>Anyway, I wondered about putting some sounds on the MC-707 from it, so I sampled the drum kits and some patches ending up with a project containing as many as I could fit in.
In the project file, there are two drum tracks with the drum samples, two drum tracks with the patches (sampled C0 thru’ C7) applied across the pads and four tone tracks of patches made with the synth samples. The QS has only eight drum kits by default, so the drum tracks have four clips of each drum set. The patches are a combination of some of my own as well as some factory patches.
In addition to the project file, all the samples used on the MC-707, plus a few extra that I couldn’t fit in the MC’s memory, are in the download so you can use these without loading up the project.
Download HERE.
]]>The guide shows these stages as three separate shots of the keyboard and what buttons are needed to apply the relevant functions –
1. Notes – Press PITCH MODE and enter notes on the keyboard
2. Transposing – Press PITCH MODE again to reset the sequencer, then press WRITE/NEXT to advance thru the sequencer. Hold WRITE/NEXT to apply transpose, accent and/or slide. The notes input in 1. will light up.
3. Timing – Press TIME MODE and apply note, tie or rest to each step in the sequence. When the last step is completed the TD-3 returns to NORMAL mode
Hope it helps.
Note also that this guide can also apply to the original TB-303 and the Roland boutique TB-03 (if in OG mode).
]]>Tracks 1 and 2 are Drum Tracks, 3-7 are Tone Tracks and 8 is a Looper. There are no clips created so you have a blank canvas to play with.
*The MIDI settings for each track are as follows:
| Value | |
|---|---|
| Tx MIDI Out1 | ON |
| Tx MIDI Out2 | ON |
| Tx USB MIDI | ON |
| Tx MIDI Note | ON |
| Tx MIDI Control Change | ON |
| Tx MIDI Program Change | OFF |
Download HERE.
]]>