Battery used is Dantona Industries GBASP-4LIP (UPC=28286-57295)- slightly smaller, with wires and 2-pin connector. Cut connector off replacement battery, cut wire on existing battery as close as possible to where they connected to old battery. Stripped wire, soldered together – red wire to red wire, black wire to black wire. Re-assembled unit, plugged in to charge. No smoke, heat, or explosion yet. Will try another attempt at 8Gb upgrade as soon as I get an opportunity.
My player has worked fine from day one, when I bought it for about $80.00 at K-mart at a Black Friday sale. Hitachi 4Gb MD works way better than sloooow 5Gb Seagate knock-off in a Rave mp3 player I scrapped. Guess I must have gotten lucky.
I recently bought a number of different mp3 players to give as Christmas gifts. None feel as substantial as this RCA that I’ve had for 3 years now. However – none of my recent purchases cost over $25.00, and almost all have very nice color displays.
]]>The hard drives almost seem to have an expiration date built into them. The last time it happened, I bought two Hitachi 4 GB drives and (gently) put one aside for future use. When the first replacement drive failed last week, I installed the second one, which died a day later.
Instead of buying yet another over-priced Hitachi CF drive, I took a chance and bought a CF to SD adapter off eBay along with a 4 GB Micro SD card and a SD adapter.
Although it did not work, giving the dreaded ‘File System Corrupted’ error; I took a chance and put a standard 8 GB SD card I had into the adapter and tried loading the 3.60 update software into the player.
And it worked! WOO-HOO!!!
Furthermore, my old 4 GB RD2762 player now says it has 8GB of storage and the battery lasts a lot longer than it did with the old Hitachi Drive. I suspect that either the micro SD card was too slow or it didn’t work because I had to use two adapters (CF to SD and SD to Micro SD).
I’m now ordering a second CF to SD adapter for my other RD2762 player (before it dies as well) and I’m tempted to buy a 16 or 32 GB SD card just to see how large a drive I can get this player to use.
Thanks again, Jason!
]]>Mitch
]]>Good luck, and I hope this helps some of you.
]]>